博文

目前显示的是标签为“boiler steel pipe”的博文

Boiler tube manufacturing method and classification

   (1) Manufacturing methods:   General boiler steel pipe use temperature is below 450 °C, China's boiler pipe is mainly made of 10 or 20 carbon steel hot-rolled pipe or cold drawn pipe.   High-pressure boiler steel pipes are often used in high temperature and high pressure conditions, and the pipes will be oxidized and corroded under the action of high temperature flue gas and water vapor. Steel pipes are required to have high durability, high corrosion resistance and good structural stability.    (2) Use:   General boiler tubes are mainly used to manufacture water-cooled wall pipes, boiling water pipes, superheated steam pipes, superheated steam pipes for locomotive boilers, large and small smoke pipes and arch brick pipes.   High-pressure boiler steel pipes are mainly used to manufacture superheater pipes, reheater pipes, air pipes, main steam pipes, etc. of high-pressure and ultra-high pressure boilers.   The boiler tubes are divided into general boiler boiler stee...

Advantages and disadvantages of cold rolled seamless steel tubes

  Cold rolled seamless pipes(GB3639-2000)are cold drawn or cold rolled precision seamless steel pipes with high accuracy of the dimension and good finish of the surface used for the machinery and hydraulic equipment. The cold rolled process refers to the method adopted to process the steel plates or strips into various types of steel products by cold working processes such as the cold bend and cold drawn processes. Cold rolled seamless pipes not only include general steel pipes, low and medium pressure boiler steel pipes, high pressure boiler steel pipes, alloy steel pipes , stainless steel pipes, petroleum cracking steel pipes, but also include carbon steel pipes with thin walls, alloy steel pipes with thin walls, stainless steel pipes with thin walls and special-shaped steel pipes. The hot rolled seamless pipes usually have outer diameter larger than 32mm and wall thickness between 2.5mm to 75mm; the cold rolled seamless pipes usually have the outer diameter less than 6mm and wall th...

Boiler tube defects and flaw detection

  According to the material science point of view, the chemical composition, physical properties, and geometry of a good metal material should be continuous, pure, and uniform. If these three aspects are insufficient or damaged, the metal material is considered to be defective. If the metal material is discontinuous in geometry (ie, not tight or uncompact or not dense), such as cracks, shrinkage, peeling, pits, delamination, pinholes, slag inclusion, etc. The metal material is considered to be a scar (abbreviated as an injury), which does not include discontinuities in chemical composition or discontinuities in physical properties. It can be seen from this that the defect contains injuries.   Boiler steel pipes usually use seamless steel pipes, which may also have defects and injuries during smelting and rolling. According to the introduction of the steel pipe plant, the defects of the boiler steel pipe (here mainly referred to as the injury) are mainly on the surface, and the outer ...