博文

目前显示的是标签为“steel tube”的博文

Heat exchanger steel tube

  Heat exchanger is transfering the part of the heat of the hot fluid to cold fluid device, also known as heat exchangers. The heat exchanger is general equipment of the chemical, petroleum, power, food and many other general equipment and plays an important role in production. Heat exchangers in chemical production can be used as a heater, cooler, condenser, evaporator and reboiler, etc., applied more widely. Many types of heat exchangers, but basically cold and hot fluid heat exchange principles and methods can be divided into three categories namely: partitions, hybrid and regenerative. In the three types of heat exchangers, the Partitions heat exchanger applications.   The role of the heat exchanger cold refrigerant will be sent to the pipeline of fresh air in the heat exchanger for heat exchange of fresh hot air into the pipe into the required low temperature. The boiler is heating, indoor winter need heating should be used.   The heat exchange tube means including low and med...

Causes and measures of welding pores in steel tube

   Weld pipe weld porosity affects not only the pipeline denseness, resulting pipeline leakage and corrosion will be induced point seriously reduce the weld strength and toughness. Factors weld porosity are: the flux in the water, dirt, oxide and iron filings, welding ingredients and cover thickness, surface quality steel and steel side plates processing, welding technology and steel molding processes.    Related prevention measures:   1. Flux ingredients. CaF2 and SiO2 containing an appropriate amount of welding, the reaction will absorb large amounts of H2, generating a high stability of the HF insoluble in the liquid metal, thereby preventing the formation of hydrogen gas holes.   2. The bulk thickness of the flux is generally 25-45mm, large solder particle size, bulk density hour take the maximum thickness, whereas the minimum value; high current, low welding speed accumulation take the maximum thickness, whereas the minimum value addition, summer or air humidity, flux recov...

Advantages of Pipeline Transportation

    The main advantages of pipeline transportation can be summarized as follows:     (1) Large volume.     An oil pipeline can continue to complete the delivery task. Depending on the size of its diameter, its annual traffic up to several million tons to tens of millions of tons, or even more than 100 million tons.     (2) Small footprint.     Transport pipelines are often buried underground and occupy very little land; the construction of transport systems proves that the buried part of the pipeline is more than 95% of the total length of the pipeline, so the permanent occupation of the land is very small, 3% of the highway, about 10% of the railway, in the transportation planning system, give priority to pipeline transportation program, for the conservation of land resources, is of great significance.     (3) Pipeline transportation construction period is short and low cost.     A large number of domest...

A guide to Rectangular and Square steel tube

    Xinyue Rectangular and Square steel tube base is aiming to build a safe, efficient, harmonious construction world hand in hand with builders, supply relevant construction materials .     For square and rectangular steel tube, we can produce:     OD:     For square tube: 10 MM * 10 MM to 800 MM *800 MM     For Rectangular steel tube: 10MM *20 MM to 1000 MM *1200 MM     Wall thickness: 0.5 MM to 50 MM     Steel Grade: S235JR, S275JR, S355JR, STK400, STK500,ASTM A500, SS330,SS400,SS500,ST52,ST37 etc.     Technique: ERW welded, seamless, extruded,cold rolled     Surface Treatment: HDP, painted     Length: up to 12M     http://www.xysteelpipe.com/info/A-guide-to-Rectangular-and-Square-steel-tube-523-1.htm